Gold framed Cork Board Tutorial- Seating Chart Display

corkboard

Happy Friday!

Today I want to share with you a pretty easy DIY project I recently did to glam up my “ordinary” cork board that was laying around in my house not being put to use.
I have several cork boards in the house that I have no idea where they came from. But I don’t know what to do with them since they’re so bland and boring,  and don’t really add to the decor… so I finally decided to do something about it.

If you have a large cork board, this can be used as wedding / event seating charts as well. It’s so easy to make and even durable and portable so I definitely recommend it to anyone looking for ways to display their seating charts.

Play around with your own paint colors, fabric, and decorations, and have fun!

What you need:

  • Simple cork board
  • Paint (in the color of your choice -I used the Martha Stewarts  metallic paint)
  • Glue
  • Masking tape
  • Piece of fabric big enough to cover the cork board
  • Fabric scissors
  • Credit card or some kind of thin plastic
  • Paint brush or foam brush
  • Razor blade

Instructions

  1. Measure the inner dimensions of the frame using a ruler. Write it down.
  2. Line the inside of the frame with masking tape (razor blades helps make clean corners).
    cork3
    cork4
  3. Paint all the visible parts of the frame. Wait to dry, and do as many coats as you need to make it look pretty 🙂 (it took me three coats)cork6
    cork5
  4. Cut the fabric to the size of the inner frame plus 1/2 inch on all sides (so if your frame’s inside dimensions are 12″ x 16″, then your fabric should be about 13″ x 17″)
  5. Lay it centered on the frame like below, and put push pins on two corners.
    cork-2
    At this point, it would be helpful to cut the corners of the fabric like this:
    cork12
  6. Lift up the fabric on the side that is not pinned down, and put a little bit of glue all over. (be careful not to use too much because you don’t want excess glue to show through the fabric and make ugly marks..)cork10Then smear it with your fingers…. cork9

    cork8

    I used aleene’s Tack it over and over glue because I had them and it works on fabric, but I’m sure this isn’t the only one that would work well.

  7. Then bring the fabric back in place and smooth out the surface and try to avoid wrinkles. At this point, you can remove the pins.
  8. Use the credit card to tuck in the extra fabric under the frame. This step requires some elbow grease:) 
    cork11

When all the loose ends
are tucked in, you’re done!



corkboard11Enjoy!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s